InstaCote™ is a plural component, rapid curing sprayable polyurea elastomer. InstaCote™ Polyurea elastomer is 100% solids with no VOC emissions. InstaCote™ Polyurea elastomer cures to a tack free surface in less than 10 seconds to yield an extremely tough, durable coating with a tensile strength of 2500-2800 psi, elongation of 280%, Thermal Shock value of -65º F with a service temperature of up to 350ºF. InstaCote™ is unaffected by ambient humidity at the time of application and totally impervious to moisture immediately following application.When applied, InstaCote™ SE packaging system serves as a strong, tight container for over the road transport of oversized LLW. This "Spray-on Container" forms a very strong penetration-resistant coating that meets or exceeds DOT regulations for shipment and waste acceptance criteria at the final disposal site. The InstaCote™ SE packaging system components can be modified and specifically engineered to provide solutions to a wide range of waste disposal problems inherent in the packaging and transport of hazardous materials.