POLYUREA COATING (M-25)
Polyura Coating (M-25) - Products - Instacote
M-25 polyurea is used to control
contamination in industrial facilities.
It is also used to control
contamination in soils and surfaces
that are exposed to harsh
M-25 is used for a wide variety of
applications requiring contamination
It is used for control of contaminated
surfaces and to protect clean surfaces from
becoming contaminated during the D&D
process. The photo demonstrates the use of
M-25 to segregate sanitary waste (upper
structure) from low-level waste (floor).
After the floor was coated with polyurea,
the building was demolished. The coating
ensured that the sanitary waste remained
segregated from the contaminated floor.
Contaminated areas that are exposed to harsh environmental conditions will be controlled for long periods using M-25 polyurea. When applied over geotextile fabric, M-25 provides a hard, water-proof “soil cap” that lasts for many years.
M-25 is used to restore the structural integrity of compromised waste packages, such as Sea Lands, Intermodals and other waste containers.
M-25 is provided in kits. A kit consists of one 55-gallon drum of isocyanate “Part A” and one 55-gallon drum of resin “Part B”. InstaCote provides a “turn key” service for the application of M-25, or we can train your work force to self - perform.